top of page

UHF RFID Fix Reader Four Port




Model Name INFOTRONICX™-UHF-RFID-WR-4P-04


Key Features

 

Impinj R2000 Built-in : Impinj Indy R2000 chip as RF


Anti-collision Algorithm : Unique I - Search multi-tag identification algorithm providing the highest


Dual CPU Architecture : inventory; Assistant CPU: data


Fast 4-Antenna Switch Inventory : Tag inventory and data transfer are parallel and

Every antenna’s inventory duration is configurable(

Minimum Duration: Polling from ANT 1 to ANT


Two Modes for Inventory : Buffer mode and Real-time


Hardware System Halt Detection : Tags will send data under real-time mode. This mode allows user to get tag data Hardware CPU status


PA Health Surveillance : Run for 24hours X 365 days without system PA status Make sure

PA never works under saturated state. Protected it for long term It can be.


18000-6B/6C Full Compatible : switched rapidly between 18000-6B and 18000-6C


18000-6B Large Data Read/Write : Read 216 bytes in one time taking less than Write 216 bytes in one time taking less than 3.5 It can read/write data with different.


Antenna Connection Detection : Detect antenna Protective for RF It can be canceled with


Excellent Cooling Design : Dual modules working and keeping correction unless they are both Heat dissipation and large cooling surface.




Electrical Characteristics

 

Dimension : 240mm(L) x 180mm(W) x 28mm(H)


Weight : 1.2 Kg


Body Material : Die-cast aluminum


Input Voltage DC : 12V ~ 18V


Standby Mode Current : <80mA


Sleep Mode Current : <100uA


Max Operating Current : 700mA +/-5% @ DC 12V Input Operating Temperature- 20 °C ~ + 85 °C


Storage Temperature : - 20 °C ~ + 85 °C


Humidity : 5%RH - 95%RH (non -condensing)


Interface Protocol : EPC global UHF Class 1 Gen 2 / ISO 18000-6C / ISO 18000-6B Spectrum


Range : 902MHz – 928MHz,865MHz – 868MHz


Regions : US, Canada and other regions following U.S. FCC Supported Regions Europe and other regions following ETSI EN 302 208 Mainland China, Taiwan, Korea, Malaysia



Output Power : 0 – 33dBm


RF Connector : TNC/RP-TNC


Output Power Precision : +/- 1dB


Output Power Flatness : +/- 0.2dB


Receive Sensitivity : < -85 dBm


Peak Inventory Speed : >700 tags/sec


Tag Buffer Capacity : 1000 tags @ 96 bit EPC


Ambient Temp Monitor : Supported


Working Mode : Single/DRM


Host Communication : RS-232 or TCP/IP


GPIO : 2 input optical coupling & 2 output coupling


Baud Rate : 115200 bps/38400bps


Heat Dissipation : Air cooling

bottom of page